The CROSS BIN NE 20/30/45 MP variant of the MOBILE CONCRETE BATCHING PLANT PRICE is the ideal option for producing low volumes of concrete on confined job sites. Fully automatic, 2 X 2 Cross Bin mobile concrete batching plant with hoppers for gravel and sand on a single chassis. combining the benefits of quick installation with minimal foundation and a tiny size
The ideal option for small and medium-sized construction enterprises is NE 20/30/45 MP. The installation requires little to no foundations, which lowers operating costs and increases mobility.INQUIRE NOW
By reducing vibrations to the scales, a single chassis enables faultless durability, simple transit, quick installation, continuous long-life operation, and sensitive weighing.
Wide platforms are a feature of NE 20/30/45 MP that make it simple and secure to access the mixer's and the weighing hoppers' essential components. consists of the upper platform for cylinder servicing, a load cell, and a motor/gearbox.
The NE 20/30/45 MP is made to fit in just one standard trailer or 40HC container, with one pair of screw conveyors for the cement hopper. The main chassis is made up of only one piece, which speeds up installation time for several installations.
NE 20/30/45 MP The mobile concrete mixing plant is plumbed and tested at the manufacturing facilities and is designed to reduce work on site during installation. The installation of a NE 20/30/45 MP compact concrete Batching plant typically takes one day, depending on the equipment.
The Nilkanth automation system is essential for producing concrete quickly and to a high standard. More than 600 concrete batching facilities that are active globally offer a significant amount of feedback for improvement. This vast experience has recently been reduced to a straightforward, thorough, and incredibly sensitive concrete batching plant panel. Therefore, any operator, whether skilled or not, can learn how to use our control panel in just 3 to 4 hours.
The most crucial stage of producing concrete is frequently achieving the appropriate homogeneity and workability within the least amount of time, therefore having dependable, high-quality mixing equipment is crucial.
|MODEL||NE-20 MP||NE-30 MP||NE-45 MP|
|OUT CAPACITY||20 m³/h||30 m³/h||45 m³/h|
|HOPPERS||2 X 2||2 X 2||2 X 2|
|STORAGE CAP.||13 Cu.M||15 Cu.M||20 Cu.M|
|MIXER||PAN TYPE||PAN TYPE||PAN TYPE|
|BATCH CAPACITY||0.35 CU.M||0.5 CU.M||0.75 CU.M|
|ADDITIVE PUMP||SELF PRIMING||SELF PRIMING||SELF PRIMING|
|CEMENT BIN||1.5 TONS||1.5 TONS||2 TONS|
|DISCHARGE HEIGHT||1.5 MTRS.|
|POWER REQUIRED||59.0 HP||69.0 HP||81.0 HP|
|POWER SUPPLY||415 V, 50 Hz, 3 PHASE, A.C.|
2 X 2 Cross Bin / hoppers hoppers or cross-shaped bins for gravel and sand storage. Pneumatically actuated gates are installed on each hopper. For the purpose of weighing sand and gravel, an integrated weighing conveyor is suspended on four electronic load cells. On one hopper designated for sand, a bin vibratory motor is installed.
The weighed gravels (aggregates) and sand are transferred from the weighing conveyor below the hoppers to the Pan Mixer unit by a rubber belt charging conveyor.
Pan type Mixer unit Heavy-duty steel pan type mixer unit with 10 mm thick wear-resistant replaceable liner plate, spring-loaded paddle mixer arms, and replaceable blades The discharge of concrete mix from the bottom of the pan mixer onto the transit mixer or concrete pump is made easier by a hydraulically actuated gate.
The water is supplied from the storage tank to the mixer by a submersible type water pump and the appropriate pipes. The amount of water needed for each cycle or batch is controlled by PLC. Water and aggregates are dosed in parallel to shorten cycle times and reduce pan mixer abrasion.
Cement Storage Bins Cement storage bin with weigher that weighs cement independently using a load cell. Cement Hopper is installed on a conveyor frame with feed charging. Screw Conveyor transports cement to the cement weigher.
Separate weighing setups with electronic load cells for the cement and gravel and sand increase concrete mix output by shortening cycle times.
PLC based control panel 50 different recipes can be stored on a PLC-based control panel with feather touch buttons. All electrical parts are manufactured by Schneider/Siemens or a comparable company.
Please do not hesitate to contact us. Call us at +91-9825173105, and we'll be happy to assist you. If you would like to pass us a thorough question or project details, you can either e-mail email@example.com or complete the inquiry form. If you want a member of our sales team to contact you, select the Call Back option.