The NE 75/90/120 STS Model Concrete Batching Plant is an automatic single-chassis plant with hoppers for gravel and sand, a charging conveyor, and a Pan Mixer.
The equipment includes a Twin shaft mixer unit, a cement weighs more batch with a screw conveyor, a rubber belt type charging conveyor, and a control panel that uses the software SACADA.
Medium-sized and large building companies should use NE 75/90/120 STS. Fewer foundations are needed for the installation, which lowers the upkeep cost and makes it easier to move.
INQUIRE NOW
The main chassis's heavy and solid construction makes it possible for it to last a very long time, move safely, work for a long time without stopping, and weigh things accurately. It also reduces vibrations, which improves accuracy.
The NE 75/90/120 STS has large platforms that make it easy to get to the main parts of the mixer and the weighing hoppers. This includes the load cell, motor, gearbox, and higher platform for servicing the cylinders.
NE 75/90/120 STS At a concrete plant, the bins that hold the aggregate are not next to each other. The standard capacities of 15, 20, and 25 CU.M. are just the beginning of what you can change. The aggregate bins are based on stationary bins and have two pneumatic gates that can be opened and closed separately per compartment.
The NE 75/90/120 STS Stationary Concrete Plant is plumbed and tested in the factory so that production and installation on-site aren't interrupted too much. A NE 75/90/120 STS Stationary concrete factory can be set up and running in as little as seven days, depending on the equipment.
To make concrete quickly and well, you need the Nilkanth automation system. Around the world, more than 600 concrete batching plants are in use, all of which give important information for development. In recent years, all this knowledge has been put into a concrete batching plant control panel that is easy to use, covers everything, and is very sensitive. So, any operator, no matter how much experience they have, can learn to use our control panel in as little as 3 to 4 hours.
Getting modern concrete mixtures to the right consistency and workability as quickly as possible is usually the most important part of making concrete. For this reason, it is important to have reliable, high-quality mixing equipment.
| MODEL | NE-75 STS | NE-90 STS | NE-120 STS |
|---|---|---|---|
| OUT CAPACITY | 75 m³/h | 90 m³/h | 120 m³/h |
| HOPPERS | 4 | 4 | 4 |
| STORAGE CAP. | 60 Cu.M | 80 Cu.M | 90 Cu.M |
| MIXER | TWINSHAFT TYPE | TWINSHAFT TYPE | TWINSHAFT TYPE |
| MIXER MAKE | SICOMA | SICOMA | SICOMA |
| BATCH CAPACITY | 1.25 Cu.M | 2.0 Cu.M | 3.0 Cu.M |
| WATER PUMP | SUBMERSIBLE | SUBMERSIBLE | SUBMERSIBLE |
| ADDITIVE PUMP | SELF PRIMING | SELF PRIMING | SELF PRIMING |
| DISCHARGE HEIGHT | 4 MTRS. | ||
| POWER SUPPLY | 415 V, 50 Hz, 3 PHASE, A.C. | ||
Four hoppers for storing gravel and sand. The gates on each hopper are moved by air pressure. Four electronic load cells and a scale built into the conveyor make it possible to weigh gravel and sand. A vibrating motor is put on the hopper of a sand hopper.
A charging conveyor with a rubber belt moves the gravel (aggregates) and sand from the weighing conveyor under the hoppers to the Twinshaft Mixer unit.
A submersible pump and suitable pipes move water from the storage tank to the mixer. PLC controls the amount of water needed for each cycle or batch. When water and gravel (aggregates) are added simultaneously, it cuts down on the Pan Mixer's cycle time and wears.
Cement Storage Bin with a separate load cell to weigh the cement weigher. On the frame of the infeed charging conveyor is where the cement hopper is. Cement is moved to the cement weigher by a Screw Conveyor.
Cement is weighed separately with electronic load cells, while gravel and sand are considered simultaneously. This cuts down on the cycle time and increases the amount of concrete mix that can be made.
The control panel, which is based on a PLC and has feather touch buttons, can store up to fifty recipes. All the electrical parts are made by Schneider, Siemens, or a similar brand. There is an insulated 6' x 7.5' operator cabin for the control panel and to run the unit.
Didn’t find what you are looking for? Feel free to get in touch with us. Just call +91-9825173105 and we will help you in any way we can. You can also send an e-mail to sales@nilkanthengg.com, or fill in the inquiry form if you would like to pass us a detailed inquiry or project information. Use the Call Back option if you would like to be contacted by our sales team.
