The NE 30/45/60 SP Model is a fully automatic Concrete Batching Plant. It has hoppers for gravel and sand on the same chassis as the charging conveyor and the Pan Mixer structure.
The plant has a wide range of parts, including gravel and sand hoppers with enough space, a weighing conveyor with electronic load cells, a Pan Type mixer unit, a cement weighs more batch with a screw conveyor, a rubber belt-type charging conveyor, and a PLC-based control panel.
NE 30/45/60 SP is the best choice for large and medium-sized building firms. The installation can be done with no or very few foundations, cutting maintenance expenses and increasing flexibility.INQUIRE NOW
Because the main chassis is made of solid materials, the scales can be used more accurately and for extended periods without getting too worn down.
The NE 30/45/60 SP has large platforms that make it easy to get to the main parts of the mixer and the weighing hoppers. This includes the load cell, motor, gearbox, and higher platform for servicing the cylinders.
The main chassis is made of a single piece, which cuts down on time needed for multiple installations. In addition, the NE 30/45/60 SP is small enough to fit in just two standard trailers or two 40HC containers, along with the cement hopper and the screw conveyor that goes with it.
NE 30/45/60 SP Standard concrete plants are plumbed and tested in the factory, so installation on-site takes less time and effort. With the right gear, NE 30/45/60 SP might be possible. Most of the time, it doesn't take more than two days to set up a stationary concrete mixing plant.
The Nilkanth automation system is essential for making concrete quickly and well without sacrificing quality. Around the world, more than 600 concrete batching plants are in use, all of which give necessary information for development. In recent years, all this knowledge has been put into a concrete batching plant control panel that is easy to use, covers everything, and is very sensitive. Our control panel is made so that any operator, no matter how much experience they have, can learn how to use it in three to four hours.
When making modern concrete, the mixing process is typically the most time-sensitive and crucial step; therefore, having reliable, high-quality mixing equipment is vital.
|MODEL||NE-30 SP||NE-45 SP||NE-60 SP|
|OUT CAPACITY||30 m³/h||45 m³/h||60 m³/h|
|STORAGE CAP.||30 Cu.M||40 Cu.M||40 Cu.M|
|MIXER||PAN TYPE||PAN TYPE||PAN TYPE|
|BATCH CAPACITY||0.5 CU.M||0.75 CU.M||1.0 CU.M|
|ADDITIVE PUMP||SELF PRIMING||SELF PRIMING||SELF PRIMING|
|CEMENT BIN||1.5 TONS||2 TONS||2 TONS|
|DISCHARGE HEIGHT||4 MTRS.|
|POWER REQUIRED||64.0 HP||81.0 HP||91.0 HP|
|POWER SUPPLY||415 V, 50 Hz, 3 PHASE, A.C.|
It's different from others because it has four hoppers to store sand and gravel. A pneumatic gate controls each hopper. Four electronic load cells hold up a weighing conveyor built into the system. This makes it possible to measure rock and sand's weight accurately. One sand hopper has a motor that makes it shake.
Gravel (aggregates) and sand are weighed on a conveyor belt below the hoppers. The materials are then moved to the Pan Mixer unit by a rubber belt-type charging conveyor.
This pan-type mixer unit is made to last. It has a 10 mm thick, wear-resistant, replaceable liner plate and paddle mixer arms with replaceable blades. A hydraulically controlled gate moves the concrete mix from the bottom of the Pan Mixer to the transit mixer or concrete pump. Planetary Gear Box combined with motor supplies power to mixing arm.
The water for the mixer comes from the storage tank via a submersible pump and the proper tubing. With the help of a programmable logic controller, the amount of water used in each cycle or batch can be changed. By dosing the water and gravel (aggregates) simultaneously, the Pan Mixer's cycle time and wear can be cut down.
Cement Storage Bin, A separate load cell weigher is built into the cement bin. The cement storage hopper is put on the in feed frame of the charging conveyor. Cement is moved to the cement weigher with the help of a screw conveyor.
Cement is measured on different scales with electronic load cells than gravel and sand. This makes the mixing process go faster and makes it possible to make it more concrete.
The feather-touch buttons on the PLC-based control panel can remember up to fifty recipes. All the electrical parts are made by Schneider, Siemens, or another similar company. The plant's operator is given a 6' by 7.5' cabin and is soundproof to use as a command center.
Didn’t find what you are looking for? Feel free to get in touch with us. Just call +91-9825173105 and we will help you in any way we can. You can also send an e-mail to email@example.com, or fill in the inquiry form if you would like to pass us a detailed inquiry or project information. Use the Call Back option if you would like to be contacted by our sales team.