NE 30/60/75 SD Model is a fully automatic, Concrete Batching Plant with gravel & sand hoppers on single chassis in line with charging conveyor and Drum Mixer structure.
The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Drum Type mixer unit, cement weigh batcher with screw conveyor, Rubber belt type charging conveyor, PLC based control panel
NE 30/60/75 SD is the best choice for medium and large construction companies. The installation requires minimum or less foundations which reduces the operational costs and brings the mobility to a new level.
INQUIRE NOW
Heavy and stable main chassis allows extreme durability, safe transportation, continuous long-life operation and sensitive weighing by minimizing the vibrations to the scales.
NE 30/60/75 SD is equipped with wide platforms to allow easy and safe access to the main parts of the mixer and the weighing hoppers. Includes the upper platform for the service of the cylinders, Load cell and motor/gearbox.
NE 30/60/75 SD is designed to fit in only Two standard trailer or Two 40HC container with one set for cement Hopper consisting of a screw conveyor, The main chassis consists of a single part and reduces the time for multiple installations.
NE 30/60/75 SD Statioanry concrete plant is designed to minimize work on site during installation and is plumbed and tested at the manufacturing facilities. Depending on the equipment, NE 30/60/75 SD Stationary concrete plant can be normally installed within 2 day.
Nilkanth automation system is the key element in fast and high-quality concrete production. More than 600 concrete batching plant operating worldwide provide an enormous feedback for the improvement. Recently this large experience has been transformed into a simple, comprehensive and extremely sensitive concrete batching plant panel. So any skilled or unskilled operator can learn about our control panel within 3-4 Hours only.
Achieving the desired homogeneity and workability of modern concrete mixtures, within the shortest period possible, is often the most critical phase of concrete production, therefore, the need for reliable, high quality mixing equipment is essential.
| MODEL | NE-30 SD | NE-60 SD | NE-75 SD |
|---|---|---|---|
| OUT CAPACITY | 30 m³/h | 60 m³/h | 75 m³/h |
| HOPPERS | 4 | 4 | 4 |
| STORAGE CAP. | 30 Cu.M | 40 Cu.M | 50 Cu.M |
| MIXER | DRUM TYPE | DRUM TYPE | DRUM TYPE |
| BATCH CAPACITY | 0.5 Cu.M | 1.0 Cu.M | 1.25 Cu.M |
| WATER PUMP | SUBMERSIBLE | SUBMERSIBLE | SUBMERSIBLE |
| ADDITIVE PUMP | SELF PRIMING | SELF PRIMING | SELF PRIMING |
| CEMENT BIN | 1.5 TONS | 2 TONS | 2 TONS |
| DISCHARGE HEIGHT | 4 MTRS. | ||
| POWER REQUIRED | 64.0 HP | 81.0 HP | 91.0 HP |
| POWER SUPPLY | 415 V, 50 Hz, 3 PHASE, A.C. | ||
Four hoppers, four hoppers for storage of gravels & sand. Pneumatics can be used to open and close the gates on each hopper. Four electronic load cells hold up the integral weighing conveyor, which measures gravel and sand's weight. One of the hoppers made for sand comes with a motor that drives the bin shake.
Gravel (also called aggregates) and sand that have been weighed are sent to the Drum Mixer unit by a rubber-belt charging conveyor. This conveyor for loading is right under the hoppers.
A reversible Drum Mixer unit with capacities of 0.5/1.0/1.25 m3 is turning on an adequately aligned heavy-duty gear ring. Depending on which way the drum is spinning, a drum mixer can either mix concrete or dump concrete that has already been mixed.
A submersible water pump and the correct pipes are used to move the water from the storage tank to the mixer. The PLC controls the amount of water used for each cycle or batch. Water and gravel can be added simultaneously to reduce cycle time and wear on the Drum Mixer (aggregates).
Cement Storage Bin with a cement weigher that uses a separate load cell to weigh the cement. The cement hopper is attached to the conveyor's frame, bringing glue into the machine. Cement is moved to the cement weigher with the help of the Screw Conveyor.
Having a separate way to weigh the cement with electronic load cells while also considering the gravel and sand helps cut down on the cycle time, increasing the concrete mix's output.
The control panel is based on a PLC with feather touch buttons. It can store up to fifty different recipes. All of the electrical parts are made by Schneider, Siemens, or a similar company. There is an insulated operator cabin that is 6 feet by 7.5 feet, holds the control panel, and lets the operator run the plant.
Didn’t find what you are looking for? Feel free to get in touch with us. Just call +91-9825173105 and we will help you in any way we can. You can also send an e-mail to sales@nilkanthengg.com, or fill in the inquiry form if you would like to pass us a detailed inquiry or project information. Use the Call Back option if you would like to be contacted by our sales team.
